RDU012515
MOUNTING SYSTEMS
(Click on picture for detail) | UTG PRO | | UTG PRO® 1"/2PCs Medium Profile P.O.I® Dovetail Rings | | | • | Proudly Designed and Made in USA | | • | Medium Profile Precision Optics Interface (P.O.I®) Scope Rings Have a 28mm Center Height to Fit 1" Tube Optics with up to a 55mm Outer Objective Diameter | | • | The innovative Precision Optics Interface (P.O.I®) Addresses 3 of the Most Critical Areas in Scope Rings -
a) Progressively Machined and Precise Inner Diameter to Achieve a Seamless Interface Between the Scope Ring and Tube
b) Torx Screw Locking Side Plate Controlled by Dual Spring Loaded Guide Rods Precisely Clenches Dovetail Rail for a Secure and Repeatable Zero Hold
c) Removable Threaded Recoil Stop-pin Provides an Additional Interface Point with the Dovetail Rail for Added Security Against Bidirectional Recoil | | • | Original Snag-free Contoured Profile with Reduced Weight and Size | | • | 6061-T6 Aircraft Aluminum and Steel Construction with a Matte Black Finish | | • | 2 Piece Ring Set, Each Equipped with 4 Top Torx Screws, Mounts onto Most Dovetail Rails
|
NOTE: We recommend to tighten the ring top screws with a torque value of about 25 inch-lb and the side plate screw with torque value of about 45 inch-lb.
|
|
|
RDU012520
MOUNTING SYSTEMS
(Click on picture for detail) | UTG PRO | | UTG PRO® 1"/2PCs High Profile P.O.I® Dovetail Rings | | | • | Proudly Designed and Made in USA | | • | High Profile Precision Optics Interface (P.O.I®) Scope Rings Have a 33mm Center Height to Fit 1" Tube Optics with up to a 65mm Outer Objective Diameter | | • | The innovative Precision Optics Interface (P.O.I®) Addresses 3 of the Most Critical Areas in Scope Rings -
a) Progressively Machined and Precise Inner Diameter to Achieve a Seamless Interface Between the Scope Ring and Tube
b) Torx Screw Locking Side Plate Controlled by Dual Spring Loaded Guide Rods Precisely Clenches Dovetail Rail for a Secure and Repeatable Zero Hold
c) Removable Threaded Recoil Stop-pin Provides an Additional Interface Point with the Dovetail Rail for Added Security Against Bidirectional Recoil | | • | Original Snag-free Contoured Profile with Reduced Weight and Size | | • | 6061-T6 Aircraft Aluminum and Steel Construction with a Matte Black Finish | | • | 2 Piece Ring Set, Each Equipped with 4 Top Torx Screws, Mounts onto Most Dovetail Rails
|
NOTE: We recommend to tighten the ring top screws with a torque value of about 25 inch-lb and the side plate screw with torque value of about 45 inch-lb.
|
|
|
RWU012510
MOUNTING SYSTEMS
(Click on picture for detail) | UTG PRO | | UTG PRO® 1"/2PCs Low Profile P.O.I® Picatinny Rings | | | • | Proudly Designed and Made in USA | | • | Low Profile P.O.I® (Precision Optics Interface) Rings Have a 23mm Center Height to Fit Optics with a 1" Tube, and up to a 45mm Outer Objective | | • | The Innovative P.O.I® (Precision Optics Interface) Addresses 3 of the Most Critical Areas in Scope Rings -
a) Progressively Machined for a Precise Inner Diameter Scope Interface to Achieve a Seamless Ring-to-Scope Interaction
b) Low Profile and Flush-fitting Locking Side Plate Controlled by Dual Spring Loaded Guide Rods Interfacing with the Rail with Torx Screw Locking to Ensure Secure and Repeatable Zero Hold
c) Square-shaped Integral Recoil Stop Interfacing with a Picatinny Slot via Complete Surface Contact to Eliminate the Possibility of Forward and Aft Movement from Recoil Vibrations | | • | 2 Piece Ring Set, Each Equipped with 4 Top Torx Screws and Designed with a 22mm Ring Width | | • | Designed to Fit on Mil-spec 1913 Picatinny Rail Platforms | | • | Machined from 6061-T6 Aluminum Alloy and 4605 Steel with Matte Black Hard Coat Anodize
|
NOTE: We recommend to tighten the ring top screws with a torque value of about 25 inch-lb and the side plate screw with torque value of about 45 inch-lb.
|
|
|
RWU012515
MOUNTING SYSTEMS
(Click on picture for detail) | UTG PRO | | UTG PRO® 1"/2PCs Medium Profile P.O.I® Picatinny Rings | | | • | Proudly Designed and Made in USA | | • | Medium Profile P.O.I® (Precision Optics Interface) Rings Have a 28mm Center Height to Fit Optics with a 1" Tube, and up to a 55mm Outer Objective | | • | The Innovative P.O.I® (Precision Optics Interface) Addresses 3 of the Most Critical Areas in Scope Rings -
a) Progressively Machined for a Precise Inner Ring Surface to Achieve a Seamless Ring-to-Scope Interaction
b) Low Profile and Flush-fitting Locking Side Plate Controlled by Dual Spring Loaded Guide Rods Interfacing with the Rail with Torx Screw Locking to Ensure Secure and Repeatable Zero Hold
c) Square-shaped Integral Recoil Stop Interfacing with a Picatinny Slot via Complete Surface Contact to Eliminate the Possibility of Forward and Aft Movement from Recoil Vibrations | | • | 2 Piece Ring Set, Each Equipped with 4 Top Torx Screws Designed with a 22mm Ring Width | | • | Designed to Fit on Mil-spec 1913 Picatinny Rail Platforms | | • | Machined from 6061-T6 Aluminum Alloy and 4605 Steel with Matte Black Hard Coat Anodize | | • | UTG PRO® Original Snag-free Contoured Profile with Reduced Weight and Size
|
NOTE: We recommend to tighten the ring top screws with a torque value of about 25 inch-lb and the side plate screw with torque value of about 45 inch-lb.
|
|
|
RWU012520
MOUNTING SYSTEMS
(Click on picture for detail) | UTG PRO | | UTG PRO® 1"/2PCs High Profile P.O.I® Picatinny Rings | | | • | Proudly Designed and Made in USA | | • | High Profile P.O.I® (Precision Optics Interface) Rings Have a 33mm Center Height to Fit Optics with a 1" Tube, and up to a 65mm Outer Objective | | • | The Innovative P.O.I® (Precision Optics Interface) Addresses 3 of the Most Critical Areas in Scope Rings -
a) Progressively Machined for a Precise Inner Ring Surface to Achieve a Seamless Ring-to-Scope Interaction
b) Low Profile and Flush-fitting Locking Side Plate Controlled by Dual Spring Loaded Guide Rods Interfacing with the Rail with Torx Screw Locking to Ensure Secure and Repeatable Zero Hold
c) Square-shaped Integral Recoil Stop Interfacing with a Picatinny Slot via Complete Surface Contact to Eliminate the Possibility of Forward and Aft Movement from Recoil Vibrations | | • | 2 Piece Ring Set, Each Equipped with 4 Top Torx Screws Designed with a 22mm Ring Width | | • | Designed to Fit on Mil-spec 1913 Picatinny Rail Platforms | | • | Machined from 6061-T6 Aluminum Alloy and 4605 Steel with Matte Black Hard Coat Anodize | | • | UTG PRO® Original Snag-free Contoured Profile with Reduced Weight and Size
|
NOTE: We recommend to tighten the ring top screws with a torque value of about 25 inch-lb and the side plate screw with torque value of about 45 inch-lb.
|
|
|
RDU013010
MOUNTING SYSTEMS
(Click on picture for detail) | UTG PRO | | UTG PRO® 30mm/2PCs Low Profile P.O.I® Dovetail Rings | | | • | Proudly Designed and Made in USA | | • | Low Profile Precision Optics Interface (P.O.I®) Scope Rings Have a 25mm Center Height to Fit 30mm Tube Optics with up to a 49mm Outer Objective Diameter | | • | The innovative Precision Optics Interface (P.O.I®) Addresses 3 of the Most Critical Areas in Scope Rings -
a) Progressively Machined and Precise Inner Diameter to Achieve a Seamless Interface Between the Scope Ring and Tube
b) Torx Screw Locking Side Plate Controlled by Dual Spring Loaded Guide Rods Precisely Clenches Dovetail Rail for a Secure and Repeatable Zero Hold
c) Removable Threaded Recoil Stop-pin Provides an Additional Interface Point with the Dovetail Rail for Added Security Against Bidirectional Recoil | | • | Original Snag-free Contoured Profile with Reduced Weight and Size | | • | 6061-T6 Aircraft Aluminum and Steel Construction with a Matte Black Finish | | • | 2 Piece Ring Set, Each Equipped with 4 Top Torx Screws, Mounts onto Most Dovetail Rails
|
NOTE: We recommend to tighten the ring top screws with a torque value of about 25 inch-lb and the side plate screw with torque value of about 45 inch-lb.
|
|
|
RDU013022
MOUNTING SYSTEMS
(Click on picture for detail) | UTG PRO | | UTG PRO® 30mm/2PCs High Profile P.O.I® Dovetail Rings | | | • | Proudly Designed and Made in USA | | • | High Profile Precision Optics Interface (P.O.I®) Scope Rings Have a 37mm Center Height to Fit 30mm Tube Optics with up to a 73mm Outer Objective Diameter | | • | The innovative Precision Optics Interface (P.O.I®) Addresses 3 of the Most Critical Areas in Scope Rings -
a) Progressively Machined and Precise Inner Diameter to Achieve a Seamless Interface Between the Scope Ring and Tube
b) Torx Screw Locking Side Plate Controlled by Dual Spring Loaded Guide Rods Precisely Clenches Dovetail Rail for a Secure and Repeatable Zero Hold
c) Removable Threaded Recoil Stop-pin Provides an Additional Interface Point with the Dovetail Rail for Added Security Against Bidirectional Recoil | | • | Original Snag-free Contoured Profile with Reduced Weight and Size | | • | 6061-T6 Aircraft Aluminum and Steel Construction with a Matte Black Finish | | • | 2 Piece Ring Set, Each Equipped with 4 Top Torx Screws, Mounts onto Most Dovetail Rails
|
NOTE: We recommend to tighten the ring top screws with a torque value of about 25 inch-lb and the side plate screw with torque value of about 45 inch-lb.
|
|
|
RWU013010
MOUNTING SYSTEMS
(Click on picture for detail) | UTG PRO | | UTG PRO® 30mm/2PCs Low Profile P.O.I® Picatinny Rings | | | • | Proudly Designed and Made in USA | | • | Low Profile P.O.I® (Precision Optics Interface) Rings, Have a 25mm Center Height to Fit Optics with a 30mm Tube, and up to a 49mm Outer Objective | | • | The Innovative P.O.I® (Precision Optics Interface) Addresses 3 of the Most Critical Areas in Scope Rings -
a) Progressively Machined for a Precise Inner Ring Surface to Achieve a Seamless Ring-to-Scope Interaction
b) Low Profile and Flush-fitting Locking Side Plate Controlled by Dual Spring Loaded Guide Rods Interfacing with the Rail with Torx Screw Locking to Ensure Secure and Repeatable Zero Hold
c) Square-shaped Integral Recoil Stop Interfacing with a Picatinny Slot via Complete Surface Contact to Eliminate the Possibility of Forward and Aft Movement from Recoil Vibrations | | • | 2 Piece Ring Set, Each Equipped with 4 Top Torx Screws Designed with a 22mm Ring Width | | • | Designed to Fit on Mil-spec 1913 Picatinny Rail Platforms | | • | Machined from 6061-T6 Aluminum Alloy and 4605 Steel with Matte Black Hard Coat Anodize | | • | UTG PRO® Original Snag-free Contoured Profile with Reduced Weight and Size
|
NOTE: We recommend to tighten the ring top screws with a torque value of about 25 inch-lb and the side plate screw with torque value of about 45 inch-lb.
|
|
|
RWU013015
MOUNTING SYSTEMS
(Click on picture for detail) | UTG PRO | | UTG PRO® 30mm/2PCs Medium Profile P.O.I® Picatinny Rings | | | • | Proudly Designed and Made in USA | | • | Medium Profile P.O.I® (Precision Optics Interface) Rings Have a 30mm Center Height to Fit Optics with a 30mm Tube and up to a 59mm Outer Objective | | • | The Innovative P.O.I® (Precision Optics Interface) Addresses 3 of the Most Critical Areas in Scope Rings -
a) Progressively Machined for a Precise Inner Ring Surface to Achieve a Seamless Ring-to-Scope Interaction
b) Low Profile and Flush-fitting Locking Side Plate Controlled by Dual Spring Loaded Guide Rods Interfacing with the Rail with Torx Screw Locking to Ensure Secure and Repeatable Zero Hold
c) Square-shaped Integral Recoil Stop Interfacing with a Picatinny Slot via Complete Surface Contact to Eliminate the Possibility of Forward and Aft Movement from Recoil Vibrations | | • | 2 Piece Ring Set, Each Equipped with 4 Top Torx Screws and Designed with a 22mm Ring Width | | • | Designed to Fit on Mil-spec 1913 Picatinny Rail Platforms | | • | Machined from 6061-T6 Aluminum Alloy and 4605 Steel with Matte Black Hard Coat Anodize | | • | UTG PRO® Original Snag-free Contoured Profile with Reduced Weight and Size
|
NOTE: We recommend to tighten the ring top screws with a torque value of about 25 inch-lb and the side plate screw with torque value of about 45 inch-lb.
|
|
|
RWU013022
MOUNTING SYSTEMS
(Click on picture for detail) | UTG PRO | | UTG PRO® 30mm/2PCs High Profile P.O.I® Picatinny Rings | | | • | Proudly Designed and Made in USA | | • | High Profile P.O.I® (Precision Optics Interface) Rings Have a 37mm Center Height to Fit Optics with a 30mm Tube, and up to a 73mm Outer Objective | | • | The Innovative P.O.I® (Precision Optics Interface) Addresses 3 of the Most Critical Areas in Scope Rings -
a) Progressively Machined for a Precise Inner Ring Surface to Achieve a Seamless Ring-to-Scope Interaction
b) Low Profile and Flush-fitting Locking Side Plate Controlled by Dual Spring Loaded Guide Rods Interfacing with the Rail with and Torx Screw Locking to Ensure Secure and Repeatable Zero Hold
c) Square-shaped Integral Recoil Stop Interfacing with a Picatinny Slot via Complete Surface Contact to Eliminate the Possibility of Forward and Aft Movement from Recoil Vibrations | | • | 2 Piece Ring Set, Each Equipped with 4 Top Torx Screws Designed with a 22mm Ring Width | | • | Designed to Fit on Mil-spec 1913 Picatinny Rail Platforms | | • | Machined from 6061-T6 Aluminum Alloy and 4605 Steel with Matte Black Hard Coat Anodize | | • | UTG PRO® Original Snag-free Contoured Profile with Reduced Weight and Size
|
NOTE: We recommend to tighten the ring top screws with a torque value of about 25 inch-lb and the side plate screw with torque value of about 45 inch-lb.
|
|
|
RWU013415
MOUNTING SYSTEMS
(Click on picture for detail) | UTG PRO | | UTG PRO® 34mm/2PCs Medium Profile P.O.I® Picatinny Rings | | | • | Proudly Designed and Made in USA | | • | Medium Profile P.O.I® (Precision Optics Interface) Rings Have a 32mm Center Height to Fit Optics with a 34mm Tube, and up to a 63mm Outer Objective | | • | The Innovative P.O.I® (Precision Optics Interface) Addresses 3 of the Most Critical Areas in Scope Rings -
a) Progressively Machined for a Precise Inner Ring Surface to Achieve a Seamless Ring-to-Scope Interaction
b) Low Profile and Flush-fitting Locking Side Plate Controlled by Dual Spring Loaded Guide Rods Interfacing with the Rail with Torx Screw Locking to Ensure Secure and Repeatable Zero Hold
c) Square-shaped Integral Recoil Stop Interfacing with a Picatinny Slot via Complete Surface Contact to Eliminate the Possibility of Forward and Aft Movement from Recoil Vibrations | | • | 2 Piece Ring Set, Each Equipped with 4 Top Torx Screws Designed with a 22mm Ring Width | | • | Designed to Fit on Mil-spec 1913 Picatinny Rail Platforms | | • | Machined from 6061-T6 Aluminum Alloy and 4605 Steel with Matte Black Hard Coat Anodize | | • | UTG PRO® Original Snag-free Contoured Profile with Reduced Weight and Size
|
NOTE: We recommend to tighten the ring top screws with a torque value of about 25 inch-lb and the side plate screw with torque value of about 45 inch-lb.
|
|
|
RWU013420
MOUNTING SYSTEMS
(Click on picture for detail) | UTG PRO | | UTG PRO® 34mm/2PCs High Profile P.O.I® Picatinny Rings | | | • | Proudly Designed and Made in USA | | • | High Profile P.O.I® (Precision Optics Interface) Rings Have a 37mm Center Height to Fit Optics with a 34mm Tube, and up to a 73mm Outer Objective | | • | The Innovative P.O.I® (Precision Optics Interface) Addresses 3 of the Most Critical Areas in Scope Rings -
a) Progressively Machined for a Precise Inner Ring Surface to Achieve a Seamless Ring-to-Scope Interaction
b) Low Profile and Flush-fitting Locking Side Plate Controlled by Dual Spring Loaded Guide Rods Interfacing with the Rail with Torx Screw Locking to Ensure Secure and Repeatable Zero Hold
c) Square-shaped Integral Recoil Stop Interfacing with a Picatinny Slot via Complete Surface Contact to Eliminate the Possibility of Forward and Aft Movement from Recoil Vibrations | | • | 2 Piece Ring Set, Each Equipped with 4 Top Torx Screws Designed with a 22mm Ring Width | | • | Designed to Fit on Mil-spec 1913 Picatinny Rail Platforms | | • | Machined from 6061-T6 Aluminum Alloy and 4605 Steel with Matte Black Hard Coat Anodize | | • | UTG PRO® Original Snag-free Contoured Profile with Reduced Weight and Size
|
NOTE: We recommend to tighten the ring top screws with a torque value of about 25 inch-lb and the side plate screw with torque value of about 45 inch-lb.
|
|
|
RDU013015
MOUNTING SYSTEMS
(Click on picture for detail) | UTG PRO | | UTG PRO® 30mm/2PCs Medium Profile P.O.I® Dovetail Rings | | | • | Proudly Designed and Made in USA | | • | Medium Profile Precision Optics Interface (P.O.I®) Scope Rings Have a 30mm Center Height to Fit 30mm Tube Optics with up to a 59mm Outer Objective Diameter | | • | The innovative Precision Optics Interface (P.O.I®) Addresses 3 of the Most Critical Areas in Scope Rings -
a) Progressively Machined and Precise Inner Diameter to Achieve a Seamless Interface Between the Scope Ring and Tube
b) Torx Screw Locking Side Plate Controlled by Dual Spring Loaded Guide Rods Precisely Clenches Dovetail Rail for a Secure and Repeatable Zero Hold
c) Removable Threaded Recoil Stop-pin Provides an Additional Interface Point with the Dovetail Rail for Added Security Against Bidirectional Recoil | | • | Original Snag-free Contoured Profile with Reduced Weight and Size | | • | 6061-T6 Aircraft Aluminum and Steel Construction with a Matte Black Finish | | • | 2 Piece Ring Set, Each Equipped with 4 Top Torx Screws, Mounts onto Most Dovetail Rails
|
NOTE: We recommend to tighten the ring top screws with a torque value of about 25 inch-lb and the side plate screw with torque value of about 45 inch-lb.
|
|
|