Displaying Result 1-13 Of 13Display 30 | 60 | 120 | Per Page
      


RDU012515
MOUNTING SYSTEMS
(Click on picture for detail)
UTG PRO UTG PRO® 1"/2PCs Medium Profile P.O.I® Dovetail Rings 
•  Proudly Designed and Made in USA
•  Medium Profile Precision Optics Interface (P.O.I®) Scope Rings Have a 28mm Center Height to Fit 1" Tube Optics with up to a 55mm Outer Objective Diameter
•  The innovative Precision Optics Interface (P.O.I®) Addresses 3 of the Most Critical Areas in Scope Rings -
a) Progressively Machined and Precise Inner Diameter to Achieve a Seamless Interface Between the Scope Ring and Tube
b) Torx Screw Locking Side Plate Controlled by Dual Spring Loaded Guide Rods Precisely Clenches Dovetail Rail for a Secure and Repeatable Zero Hold
c) Removable Threaded Recoil Stop-pin Provides an Additional Interface Point with the Dovetail Rail for Added Security Against Bidirectional Recoil
•  Original Snag-free Contoured Profile with Reduced Weight and Size
•  6061-T6 Aircraft Aluminum and Steel Construction with a Matte Black Finish
•  2 Piece Ring Set, Each Equipped with 4 Top Torx Screws, Mounts onto Most Dovetail Rails


NOTE:
We recommend to tighten the ring top screws with a torque value of about 25 inch-lb and the side plate screw with torque value of about 45 inch-lb.



RDU012520
MOUNTING SYSTEMS
(Click on picture for detail)
UTG PRO UTG PRO® 1"/2PCs High Profile P.O.I® Dovetail Rings 
•  Proudly Designed and Made in USA
•  High Profile Precision Optics Interface (P.O.I®) Scope Rings Have a 33mm Center Height to Fit 1" Tube Optics with up to a 65mm Outer Objective Diameter
•  The innovative Precision Optics Interface (P.O.I®) Addresses 3 of the Most Critical Areas in Scope Rings -
a) Progressively Machined and Precise Inner Diameter to Achieve a Seamless Interface Between the Scope Ring and Tube
b) Torx Screw Locking Side Plate Controlled by Dual Spring Loaded Guide Rods Precisely Clenches Dovetail Rail for a Secure and Repeatable Zero Hold
c) Removable Threaded Recoil Stop-pin Provides an Additional Interface Point with the Dovetail Rail for Added Security Against Bidirectional Recoil
•  Original Snag-free Contoured Profile with Reduced Weight and Size
•  6061-T6 Aircraft Aluminum and Steel Construction with a Matte Black Finish
•  2 Piece Ring Set, Each Equipped with 4 Top Torx Screws, Mounts onto Most Dovetail Rails


NOTE:
We recommend to tighten the ring top screws with a torque value of about 25 inch-lb and the side plate screw with torque value of about 45 inch-lb.



RWU012510
MOUNTING SYSTEMS
(Click on picture for detail)
UTG PRO UTG PRO® 1"/2PCs Low Profile P.O.I® Picatinny Rings 
•  Proudly Designed and Made in USA
•  Low Profile P.O.I® (Precision Optics Interface) Rings Have a 23mm Center Height to Fit Optics with a 1" Tube, and up to a 45mm Outer Objective
•  The Innovative P.O.I® (Precision Optics Interface) Addresses 3 of the Most Critical Areas in Scope Rings -
a) Progressively Machined for a Precise Inner Diameter Scope Interface to Achieve a Seamless Ring-to-Scope Interaction
b) Low Profile and Flush-fitting Locking Side Plate Controlled by Dual Spring Loaded Guide Rods Interfacing with the Rail with Torx Screw Locking to Ensure Secure and Repeatable Zero Hold
c) Square-shaped Integral Recoil Stop Interfacing with a Picatinny Slot via Complete Surface Contact to Eliminate the Possibility of Forward and Aft Movement from Recoil Vibrations
•  2 Piece Ring Set, Each Equipped with 4 Top Torx Screws and Designed with a 22mm Ring Width
•  Designed to Fit on Mil-spec 1913 Picatinny Rail Platforms
•  Machined from 6061-T6 Aluminum Alloy and 4605 Steel with Matte Black Hard Coat Anodize


NOTE:
We recommend to tighten the ring top screws with a torque value of about 25 inch-lb and the side plate screw with torque value of about 45 inch-lb.



RWU012515
MOUNTING SYSTEMS
(Click on picture for detail)
UTG PRO UTG PRO® 1"/2PCs Medium Profile P.O.I® Picatinny Rings 
•  Proudly Designed and Made in USA
•  Medium Profile P.O.I® (Precision Optics Interface) Rings Have a 28mm Center Height to Fit Optics with a 1" Tube, and up to a 55mm Outer Objective
•  The Innovative P.O.I® (Precision Optics Interface) Addresses 3 of the Most Critical Areas in Scope Rings -
a) Progressively Machined for a Precise Inner Ring Surface to Achieve a Seamless Ring-to-Scope Interaction
b) Low Profile and Flush-fitting Locking Side Plate Controlled by Dual Spring Loaded Guide Rods Interfacing with the Rail with Torx Screw Locking to Ensure Secure and Repeatable Zero Hold
c) Square-shaped Integral Recoil Stop Interfacing with a Picatinny Slot via Complete Surface Contact to Eliminate the Possibility of Forward and Aft Movement from Recoil Vibrations
•  2 Piece Ring Set, Each Equipped with 4 Top Torx Screws Designed with a 22mm Ring Width
•  Designed to Fit on Mil-spec 1913 Picatinny Rail Platforms
•  Machined from 6061-T6 Aluminum Alloy and 4605 Steel with Matte Black Hard Coat Anodize
•  UTG PRO® Original Snag-free Contoured Profile with Reduced Weight and Size


NOTE:
We recommend to tighten the ring top screws with a torque value of about 25 inch-lb and the side plate screw with torque value of about 45 inch-lb.



RWU012520
MOUNTING SYSTEMS
(Click on picture for detail)
UTG PRO UTG PRO® 1"/2PCs High Profile P.O.I® Picatinny Rings 
•  Proudly Designed and Made in USA
•  High Profile P.O.I® (Precision Optics Interface) Rings Have a 33mm Center Height to Fit Optics with a 1" Tube, and up to a 65mm Outer Objective
•  The Innovative P.O.I® (Precision Optics Interface) Addresses 3 of the Most Critical Areas in Scope Rings -
a) Progressively Machined for a Precise Inner Ring Surface to Achieve a Seamless Ring-to-Scope Interaction
b) Low Profile and Flush-fitting Locking Side Plate Controlled by Dual Spring Loaded Guide Rods Interfacing with the Rail with Torx Screw Locking to Ensure Secure and Repeatable Zero Hold
c) Square-shaped Integral Recoil Stop Interfacing with a Picatinny Slot via Complete Surface Contact to Eliminate the Possibility of Forward and Aft Movement from Recoil Vibrations
•  2 Piece Ring Set, Each Equipped with 4 Top Torx Screws Designed with a 22mm Ring Width
•  Designed to Fit on Mil-spec 1913 Picatinny Rail Platforms
•  Machined from 6061-T6 Aluminum Alloy and 4605 Steel with Matte Black Hard Coat Anodize
•  UTG PRO® Original Snag-free Contoured Profile with Reduced Weight and Size


NOTE:
We recommend to tighten the ring top screws with a torque value of about 25 inch-lb and the side plate screw with torque value of about 45 inch-lb.



RDU013010
MOUNTING SYSTEMS
(Click on picture for detail)
UTG PRO UTG PRO® 30mm/2PCs Low Profile P.O.I® Dovetail Rings 
•  Proudly Designed and Made in USA
•  Low Profile Precision Optics Interface (P.O.I®) Scope Rings Have a 25mm Center Height to Fit 30mm Tube Optics with up to a 49mm Outer Objective Diameter
•  The innovative Precision Optics Interface (P.O.I®) Addresses 3 of the Most Critical Areas in Scope Rings -
a) Progressively Machined and Precise Inner Diameter to Achieve a Seamless Interface Between the Scope Ring and Tube
b) Torx Screw Locking Side Plate Controlled by Dual Spring Loaded Guide Rods Precisely Clenches Dovetail Rail for a Secure and Repeatable Zero Hold
c) Removable Threaded Recoil Stop-pin Provides an Additional Interface Point with the Dovetail Rail for Added Security Against Bidirectional Recoil
•  Original Snag-free Contoured Profile with Reduced Weight and Size
•  6061-T6 Aircraft Aluminum and Steel Construction with a Matte Black Finish
•  2 Piece Ring Set, Each Equipped with 4 Top Torx Screws, Mounts onto Most Dovetail Rails


NOTE:
We recommend to tighten the ring top screws with a torque value of about 25 inch-lb and the side plate screw with torque value of about 45 inch-lb.



RDU013022
MOUNTING SYSTEMS
(Click on picture for detail)
UTG PRO UTG PRO® 30mm/2PCs High Profile P.O.I® Dovetail Rings 
•  Proudly Designed and Made in USA
•  High Profile Precision Optics Interface (P.O.I®) Scope Rings Have a 37mm Center Height to Fit 30mm Tube Optics with up to a 73mm Outer Objective Diameter
•  The innovative Precision Optics Interface (P.O.I®) Addresses 3 of the Most Critical Areas in Scope Rings -
a) Progressively Machined and Precise Inner Diameter to Achieve a Seamless Interface Between the Scope Ring and Tube
b) Torx Screw Locking Side Plate Controlled by Dual Spring Loaded Guide Rods Precisely Clenches Dovetail Rail for a Secure and Repeatable Zero Hold
c) Removable Threaded Recoil Stop-pin Provides an Additional Interface Point with the Dovetail Rail for Added Security Against Bidirectional Recoil
•  Original Snag-free Contoured Profile with Reduced Weight and Size
•  6061-T6 Aircraft Aluminum and Steel Construction with a Matte Black Finish
•  2 Piece Ring Set, Each Equipped with 4 Top Torx Screws, Mounts onto Most Dovetail Rails


NOTE:
We recommend to tighten the ring top screws with a torque value of about 25 inch-lb and the side plate screw with torque value of about 45 inch-lb.



RWU013010
MOUNTING SYSTEMS
(Click on picture for detail)
UTG PRO UTG PRO® 30mm/2PCs Low Profile P.O.I® Picatinny Rings 
•  Proudly Designed and Made in USA
•  Low Profile P.O.I® (Precision Optics Interface) Rings, Have a 25mm Center Height to Fit Optics with a 30mm Tube, and up to a 49mm Outer Objective
•  The Innovative P.O.I® (Precision Optics Interface) Addresses 3 of the Most Critical Areas in Scope Rings -
a) Progressively Machined for a Precise Inner Ring Surface to Achieve a Seamless Ring-to-Scope Interaction
b) Low Profile and Flush-fitting Locking Side Plate Controlled by Dual Spring Loaded Guide Rods Interfacing with the Rail with Torx Screw Locking to Ensure Secure and Repeatable Zero Hold
c) Square-shaped Integral Recoil Stop Interfacing with a Picatinny Slot via Complete Surface Contact to Eliminate the Possibility of Forward and Aft Movement from Recoil Vibrations
•  2 Piece Ring Set, Each Equipped with 4 Top Torx Screws Designed with a 22mm Ring Width
•  Designed to Fit on Mil-spec 1913 Picatinny Rail Platforms
•  Machined from 6061-T6 Aluminum Alloy and 4605 Steel with Matte Black Hard Coat Anodize
•  UTG PRO® Original Snag-free Contoured Profile with Reduced Weight and Size


NOTE:
We recommend to tighten the ring top screws with a torque value of about 25 inch-lb and the side plate screw with torque value of about 45 inch-lb.



RWU013015
MOUNTING SYSTEMS
(Click on picture for detail)
UTG PRO UTG PRO® 30mm/2PCs Medium Profile P.O.I® Picatinny Rings 
•  Proudly Designed and Made in USA
•  Medium Profile P.O.I® (Precision Optics Interface) Rings Have a 30mm Center Height to Fit Optics with a 30mm Tube and up to a 59mm Outer Objective
•  The Innovative P.O.I® (Precision Optics Interface) Addresses 3 of the Most Critical Areas in Scope Rings -
a) Progressively Machined for a Precise Inner Ring Surface to Achieve a Seamless Ring-to-Scope Interaction
b) Low Profile and Flush-fitting Locking Side Plate Controlled by Dual Spring Loaded Guide Rods Interfacing with the Rail with Torx Screw Locking to Ensure Secure and Repeatable Zero Hold
c) Square-shaped Integral Recoil Stop Interfacing with a Picatinny Slot via Complete Surface Contact to Eliminate the Possibility of Forward and Aft Movement from Recoil Vibrations
•  2 Piece Ring Set, Each Equipped with 4 Top Torx Screws and Designed with a 22mm Ring Width
•  Designed to Fit on Mil-spec 1913 Picatinny Rail Platforms
•  Machined from 6061-T6 Aluminum Alloy and 4605 Steel with Matte Black Hard Coat Anodize
•  UTG PRO® Original Snag-free Contoured Profile with Reduced Weight and Size


NOTE:
We recommend to tighten the ring top screws with a torque value of about 25 inch-lb and the side plate screw with torque value of about 45 inch-lb.



RWU013022
MOUNTING SYSTEMS
(Click on picture for detail)
UTG PRO UTG PRO® 30mm/2PCs High Profile P.O.I® Picatinny Rings 
•  Proudly Designed and Made in USA
•  High Profile P.O.I® (Precision Optics Interface) Rings Have a 37mm Center Height to Fit Optics with a 30mm Tube, and up to a 73mm Outer Objective
•  The Innovative P.O.I® (Precision Optics Interface) Addresses 3 of the Most Critical Areas in Scope Rings -
a) Progressively Machined for a Precise Inner Ring Surface to Achieve a Seamless Ring-to-Scope Interaction
b) Low Profile and Flush-fitting Locking Side Plate Controlled by Dual Spring Loaded Guide Rods Interfacing with the Rail with and Torx Screw Locking to Ensure Secure and Repeatable Zero Hold
c) Square-shaped Integral Recoil Stop Interfacing with a Picatinny Slot via Complete Surface Contact to Eliminate the Possibility of Forward and Aft Movement from Recoil Vibrations
•  2 Piece Ring Set, Each Equipped with 4 Top Torx Screws Designed with a 22mm Ring Width
•  Designed to Fit on Mil-spec 1913 Picatinny Rail Platforms
•  Machined from 6061-T6 Aluminum Alloy and 4605 Steel with Matte Black Hard Coat Anodize
•  UTG PRO® Original Snag-free Contoured Profile with Reduced Weight and Size


NOTE:
We recommend to tighten the ring top screws with a torque value of about 25 inch-lb and the side plate screw with torque value of about 45 inch-lb.



RWU013415
MOUNTING SYSTEMS
(Click on picture for detail)
UTG PRO UTG PRO® 34mm/2PCs Medium Profile P.O.I® Picatinny Rings 
•  Proudly Designed and Made in USA
•  Medium Profile P.O.I® (Precision Optics Interface) Rings Have a 32mm Center Height to Fit Optics with a 34mm Tube, and up to a 63mm Outer Objective
•  The Innovative P.O.I® (Precision Optics Interface) Addresses 3 of the Most Critical Areas in Scope Rings -
a) Progressively Machined for a Precise Inner Ring Surface to Achieve a Seamless Ring-to-Scope Interaction
b) Low Profile and Flush-fitting Locking Side Plate Controlled by Dual Spring Loaded Guide Rods Interfacing with the Rail with Torx Screw Locking to Ensure Secure and Repeatable Zero Hold
c) Square-shaped Integral Recoil Stop Interfacing with a Picatinny Slot via Complete Surface Contact to Eliminate the Possibility of Forward and Aft Movement from Recoil Vibrations
•  2 Piece Ring Set, Each Equipped with 4 Top Torx Screws Designed with a 22mm Ring Width
•  Designed to Fit on Mil-spec 1913 Picatinny Rail Platforms
•  Machined from 6061-T6 Aluminum Alloy and 4605 Steel with Matte Black Hard Coat Anodize
•  UTG PRO® Original Snag-free Contoured Profile with Reduced Weight and Size


NOTE:
We recommend to tighten the ring top screws with a torque value of about 25 inch-lb and the side plate screw with torque value of about 45 inch-lb.



RWU013420
MOUNTING SYSTEMS
(Click on picture for detail)
UTG PRO UTG PRO® 34mm/2PCs High Profile P.O.I® Picatinny Rings 
•  Proudly Designed and Made in USA
•  High Profile P.O.I® (Precision Optics Interface) Rings Have a 37mm Center Height to Fit Optics with a 34mm Tube, and up to a 73mm Outer Objective
•  The Innovative P.O.I® (Precision Optics Interface) Addresses 3 of the Most Critical Areas in Scope Rings -
a) Progressively Machined for a Precise Inner Ring Surface to Achieve a Seamless Ring-to-Scope Interaction
b) Low Profile and Flush-fitting Locking Side Plate Controlled by Dual Spring Loaded Guide Rods Interfacing with the Rail with Torx Screw Locking to Ensure Secure and Repeatable Zero Hold
c) Square-shaped Integral Recoil Stop Interfacing with a Picatinny Slot via Complete Surface Contact to Eliminate the Possibility of Forward and Aft Movement from Recoil Vibrations
•  2 Piece Ring Set, Each Equipped with 4 Top Torx Screws Designed with a 22mm Ring Width
•  Designed to Fit on Mil-spec 1913 Picatinny Rail Platforms
•  Machined from 6061-T6 Aluminum Alloy and 4605 Steel with Matte Black Hard Coat Anodize
•  UTG PRO® Original Snag-free Contoured Profile with Reduced Weight and Size


NOTE:
We recommend to tighten the ring top screws with a torque value of about 25 inch-lb and the side plate screw with torque value of about 45 inch-lb.



RDU013015
MOUNTING SYSTEMS
(Click on picture for detail)
UTG PRO UTG PRO® 30mm/2PCs Medium Profile P.O.I® Dovetail Rings 
•  Proudly Designed and Made in USA
•  Medium Profile Precision Optics Interface (P.O.I®) Scope Rings Have a 30mm Center Height to Fit 30mm Tube Optics with up to a 59mm Outer Objective Diameter
•  The innovative Precision Optics Interface (P.O.I®) Addresses 3 of the Most Critical Areas in Scope Rings -
a) Progressively Machined and Precise Inner Diameter to Achieve a Seamless Interface Between the Scope Ring and Tube
b) Torx Screw Locking Side Plate Controlled by Dual Spring Loaded Guide Rods Precisely Clenches Dovetail Rail for a Secure and Repeatable Zero Hold
c) Removable Threaded Recoil Stop-pin Provides an Additional Interface Point with the Dovetail Rail for Added Security Against Bidirectional Recoil
•  Original Snag-free Contoured Profile with Reduced Weight and Size
•  6061-T6 Aircraft Aluminum and Steel Construction with a Matte Black Finish
•  2 Piece Ring Set, Each Equipped with 4 Top Torx Screws, Mounts onto Most Dovetail Rails


NOTE:
We recommend to tighten the ring top screws with a torque value of about 25 inch-lb and the side plate screw with torque value of about 45 inch-lb.


Displaying Result 1-13 Of 13Display 30 | 60 | 120 | Per Page