See You in Germany at Enforce Tac and IWA

26 - 28 February 2024

Nuremberg, Germany

29 February - 3 March 2024

Nuremberg, Germany

INTEGRIX® iX8 1-8X28 FFP & SFP LPVO

INTEGRIX® optics adhere to the highest of manufacturing and optical standard demanded by distinguished shooters. From the sum of its parts and throughout its assembly, INTEGRIX® encompasses the diligence needed to achieve consistent and repeatable precision shot-to-shot. Finish with top-performing result downrange with an optic that is built ready for when and where it counts. The solution is you. The difference is INTEGRIX®.

The INTEGRIX® iX8 1-8X28 FFP was developed as the first riflescope in the INTEGRIX® product line, defining new standards in optical performance for a 1-8X LPVO. Releasing in Q2 2024 is an SFP variant (iX801SA3) that is catered towards the IPSC rifle shooter. Its A3 MOA reticle, derived from the traditional German 4 reticle, features three 2 MOA thick stadia coming in from the outer edges and traversing towards the center similar to that of a duplex while stepping down in thickness to 1/4 MOA along the way. The focal point boasts a 1 MOA illuminated dot.

INTEGRIX® iX6, 3-18X44 FFP MID POWER

The INTEGRIX® iX6 3-18X44 FFP is available with either our A2 MOA (iX603FA2) or M1 MRAD (iX603FM1) reticle. The clutter-free German duplex inspired A2 MOA reticle features sub-tensions that transition from being bolded to see-through while tapering down to a fine point towards the reticle’s center. The center crosshair, at low magnification, provides a quick-to-acquire T-dot and fully illuminates. At high magnification, the T-dot opens and provides an unobtrusive 0.5 MOA floating center-dot which focuses the eyes to the center of the reticle and frees up space between it and the remainder of the reticle to provide a better view of critical target details.

• Individually Centration Tested German and Japanese Glass, Concentric Tested Post Assembly
• Low Aberration Optimized Image Quality with Over a 92% Light Transmittance
• Edge to Edge Sharpness, High Contrast and Resolution Standard
• -40° to 160° Fahrenheit Operational Range and IPX7 Waterproof Rating

INTEGRIX® iX6, 4.5-27X56 FFP HIGH POWER

The INTEGRIX® iX6 4.5-27X56 FFP LR/ELR is available in two different MRAD reticles. The M1 MRAD (iX645FM1) is a tried-and-true Christmas tree-styled reticle made for the long-range PRS. The reticle makeup consists of .12 Mils of holdovers broken into .2 Mil increments for exact shot placement with its upper quadrant being clutter-free while still providing four Mils of hold-under and a 1 Mil section of .1 Mil increments for fine measuring. The main horizontal stadia provide twenty-four Mils of wind holds with 2 Mils in .1 Mil increments on both sides.

The M2 MRAD (iX645FM2), a more modernized and minimalist clutter-free Christmas tree-styled MRAD reticle caters to the more tactical. A wide-open upper quadrant makes the most of your FOV while a .2 Mil floating donut makes for your center hold. The main vertical stadia is spaced out in .2 Mil increments with .5 Mil markings in the center of the segments. 2 Mils of .1 Mil increments are also applied.

INTEGRIX® iX6 6-36X56 FFP LR/ELR

The INTEGRIX® iX6 6-36X56 FFP LR/ELR is available in two different MRAD reticles. The M1 MRAD (iX606FM1) is a tried-and-true Christmas tree-styled reticle made for the long-range PRS. The reticle makeup consists of .12 Mils of holdovers broken into .2 Mil increments for exact shot placement with its upper quadrant being clutter-free while still providing four Mils of hold-under and a 1 Mil section of .1 Mil increments for fine measuring. The main horizontal stadia provide twenty-four Mils of wind holds with 2 Mils in .1 Mil increments on both sides.

The M2 MRAD (iX606FM2), a more modernized and minimalist clutter-free Christmas tree-styled MRAD reticle caters to the more tactical. A wide-open upper quadrant makes the most of your FOV while a .2 Mil floating donut makes for your center hold. The main vertical stadia is spaced out in .2 Mil increments with .5 Mil markings in the center of the segments. 2 Mils of .1 Mil increments are also applied.

ACCUSHOT PRO™ AS6 1-6X24 FFP & SFP

For the shooters searching for solid all-around performance, ACCUSHOT PRO™ optics feature a similar build quality and feature set to that of our premier INTEGRIX™ optics line, but at entry point that is more accessible.

ACCUSHOT PRO™ optics feature optimized clarity with a 90% light transmission for vivid viewfinder clarity. Eye relief remains constant throughout its magnification range and a full-range eyepiece diopter provides fine-tuned reticle clarity and sharpness. Uncapped lockable and zero resettable windage and elevation turrets and a serrated power ring make adjusting quick to acquire and instinctive. An optional power ring throw lever is included. Reticles are glass-etched and feature variable red and green illumination with a 12-hour automatic shutoff.

The AS6 1-6X24 first focal plane is available with our A1 MOA (AS601FA1) or B1 BDC (S601FB1) reticle. Whereas its second focal plane counterpart features our A3 MOA (AS601SA3) reticle that is IPSC rifle shooter driven.

ACCUSHOT PRO™ AS3 3-9X36 FFP MID POWER

ACCUSHOT PRO™ optics feature optimized clarity with a 90% light transmission for vivid viewfinder clarity. Eye relief remains constant throughout its magnification range and a full-range eyepiece diopter provides fine-tuned reticle clarity and sharpness. Uncapped lockable and zero resettable windage and elevation turrets and a serrated power ring make adjusting quick to acquire and instinctive. An optional power ring throw lever is included. Reticles are glass-etched and feature variable red and green illumination with a 12-hour automatic shutoff.

The AS3 3-9X36 FFP Mid Power (AS303FA2) features a versatile parallax adjustment range that starts at the 10 yard line and an A2 MOA reticle, a clutter-free duplex-inspired illuminated reticle. The scope albeit comparable in size and weight to an LPVO, is lighter and shorter than most of what is available in the marketplace making it an excellent choice for the AR platform and other similar long guns. 

ACCUSHOT PRO™ AS4 3-12X42 FFP MID POWER

ACCUSHOT PRO™ optics feature optimized clarity with a 90% light transmission for vivid viewfinder clarity. Eye relief remains constant throughout its magnification range and a full-range eyepiece diopter provides fine-tuned reticle clarity and sharpness. Uncapped lockable and zero resettable windage and elevation turrets and a serrated power ring make adjusting quick to acquire and instinctive. An optional power ring throw lever is included. Reticles are glass-etched and feature variable red and green illumination with a 12-hour automatic shutoff.

The AS3 3-12X42 FFP Mid Power (AS403FA2) features a versatile A2 MOA reticle. A German Duplex inspired reticle with sub-tensions that transition from bold to see-through while tapering down to a fine point towards the reticle's center, drawing the eyes in. The reticle is clutter-free at both low and high magnifications and provides a clear view of critical target details. 

UTG PRO® MONOLITHIC M-LOK® HANDGUARDS FOR MP5® & MP5K

UTG PRO® brings to the market a classic improvement for the iconic MP5 with a unique monolithic handguard. The UTG PRO®  monolithic M-LOK® handguard for MP5® combines M-LOK® and optics real estate into one rigid and slim drop-in mount.

Our patented claw mount locking interface utilizes four proprietary lugs that are inserted from the sides and through the upper monolithic portion of the handguard where four vertically installed T10 screws securely clamp the lugs against the receiver.

• Proudly Designed and Made in USA
• Monolithic Design Combines M-LOK and Optics Real Estate into One Rigid Mount
• Extended 16 Slot Picatinny Flat-Top with Cutout for Serial Number Identification
• 17 Full and 5 Half M-LOK® Slots Around Circumference of Handguard

After the recent and successful release of the monolithic handguard for the MP5® and after the many requests by our customers, the UTG PRO® Monolithic M-LOK® handguard for MP5K (MTU055SSMK) is set to become a reality in early Q1 of 2024.  

UTG PRO® AR15 AMBI BILLET RECEIVER SET

The UTG PRO® AR15 AMBI Billet Receiver Set (FCR02) is our take on the truly ambidextrous. Outside of the upper being right-side ejecting, our matching receiver set is completely left and right-handed friendly. The true ambidextrous lower receiver is laid out in way to supplement not just a dominantly right or left-handed shooter, but a shooter that may find themselves having to shoot either hand depending upon their environment and situation. All controls from the right-side bolt catch and release to the left-side magazine release are where one expects them to be. 

The UTG PRO® AMBI lower receiver carries over from our standard lower receiver the same captured buffer detent and rear takedown pin detent and spring design that prevents the inadvertent launch of the buffer detent and bending of the rear takedown pin spring after removal of the receiver end plate and buffer tube.

UTG PRO® AK SIDE FOLDER

The UTG PRO AK Side Folder is an impact and heat resistant glass fiber-reinforced side-folding polymer stock for the AK platform. Proudly designed and made in Michigan, the AK Side Folder is compatible with side-mounted optics with its fold-to-the-right design. From retention and while folded, the stock positively locks into place when deployed and unlocks via a left-sided push-button.

Length of pull is 5 position adjustable and adjusted in 0.71" increments, providing a LOP adjustable range from 13.59" to 16.42". Adjustment can be configured to deploy directly to the user's preferred position via spring-loaded activation. An angled nonskip rubberized buttpad keeps the stock tight in the shoulder pocket. Rounding out the features of the UTG PRO AK Side Folder are QD sling swivel housings at the front and rear of the stock. 

Models Available:
RBU47FS01, Compatible with Straight Tang Stamped AK Receivers
RBU47FS02, Compatible with Yugo Pattern AK Receivers

UTG® BIG BORE BIPODS

The UTG Big Bore Bipod is a heavy-duty bipod designed from the ground up for heavy calibered LR/ELR rifles. Capable of withstanding a steady diet of .50 BMG, the Big Bore Bipod is available with either a MIL-STD-1913 Picatinny or ARCA mount. Either flavor of mount is 40° pannable and 22° tiltable with tension adjustment levers that function independently of one another. The throw levers are user serviceable and can be readjusted over time as the bipod wears in.

The bipod’s hub sits within minimal offset in relation to its mount. This provides improved stability by having a lower center of gravity, better weight distribution, and in addition to the bipod's 60° wide open angle, makes the bipod far unlikely to topple over when used in any one of its 0°-, 45°-, or 90°-degree positions. The legs are largely extendable providing a wide range in center-height adjustment, lockable at each height increment, and automatically retract at a push of a button.

UTG PRO® M-LOK® ARCA RAILS

Available in four different lengths, UTG PRO® M-LOK® ARCA rails are Michigan made and precision machined from 7075-T6 aluminum and finished in a matte black anodize. Skeletonized for reduced weight with dehorned corners and melted contours to prevent snagging and discomfort when shooting unsupported. 

• Forms a Continuous Rail when Multiple Rails are Installed in line
• M-LOK® Interface Spaced for Installation in Complete slots or in between Adjacent Slots
• R-LOCK and MRAS QD Mount Compatible
• Made in USA

Models Available:

• 3" Length, TLUAM01
• 7.86" Length, TLUAM02
• 10.22" Length, TLUAM03
• 14.94" Length, TLUAM04